GX CS4-I Portable PCP Air Compressor, 350W Powerful Motor,Max 5800Psi/40Mpa, Built-in Home Converter, Water and Fans Cooling, 5 Hours Continous Work, 12V Auto Stop
This CS4-I PCP compressor has a new upgraded 350W motor , and adopts four-stage compression technology. It is very stable when working, and it is very quiet with only 70db....
-
This CS4-I PCP compressor has a new upgraded 350W motor , and adopts four-stage compression technology. It is very stable when working, and it is very quiet with only 70db. Maximum filling 5800Psi/40Mpa.Notice :First confirm the maximum safe pressure of your gas cylinder, do not over-inflate, otherwise it will cause safety problems. At the same time, it is equipped with a double-pointer pressure gauge, and the two-level setting auto-stop pressure, which is more secure.
- A water tank and a grease tank are designed on the top of the compressor. The excellent cooling can achieve 5 hours of continuous work and can fill a maximum 6.8L gas cylinder. Note: For the first use, it must be filled with 500ml of neutral distilled water or antifreeze ( PH is about 7). Note: 1) Be sure to add neutral antifreeze if it freezes in your area. 2):Do not turn the grease knob until after 6 hours of use, otherwise will cause bad performance. then turn it one turn.
- 15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi ,only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes.
- Built-in 110v to 12V DC Converter: Compared to the GX E-CS4, the CS4-I has a built-in converter for greater convenience. You can use car battery or household outlet as power supply. The machine is also equipped with a built-in oil-water separator which never needs to be replaced, so you don't need to buy other external oil-water separators.
-
Please read user manual carefully before turning on compressor. All GX pum p come with 12 months warranty service and life time technology support. Product size: 11.8*6.1*12.4 inch , weight: 29lb. ATTENTION: when filling is complete, please close the bottle valve first (when filling bottle) and then open compressor's bleed valve to release line pressure . All pressure must be released from compressor before startin
- note: when add coolant first time, add full tank, turn on switch (don't press start button), water pump will run, coolant will flow into inner water pipes, then keep adding more coolant until water tank is full.
- warm tips: when filling a bottle which has pressure inside, such like 3000psi at beginning, if you want to fill to 4500psi . 1, Hook compressor hose to the bottle , leave bottle valve closed and start compressor. 2,when the compressor gauge is higher than the bottle pressure, open the bottle valve.
