GX H-4 PCP Hand Pump, 3.5 Stage High Pressure 30Mpa/4500Psi Air Rifle Filling Stirrup Pump,.
3.5 Stage High Pressure Design and High Effency: With the exclusive 3.5 stage design by GX pump, it compresses the maximum amount of air possible from each smooth stroke. That means...
- 3.5 Stage High Pressure Design and High Effency: With the exclusive 3.5 stage design by GX pump, it compresses the maximum amount of air possible from each smooth stroke. That means fewer strokes and less work to fill your air gun. You will also save more power comparing with traditional hand pumps. Test inflating result: Charging 500cc tank from 1000PSI-3000PSI, needs about 350 fills; 200cc Tank from 1000PSI-3000Psi.needs about 140 fills.
- With Oil-Moisture Filter : With the new filter design, it can filter above 90% of moisture. So you can feel free to inflate your scuba diving tank without moisture air. When the blue desiccant become red as enough water, you can pour them out for dring by referring to the user manual.
- Durable Quality and Durable Performance: With the high quality stainless steel pump body and rubber handle, wide and strong base plate, it can ensure more stable and long-lasting using life. It can bear over 15000 times of tear and wear. At the 200 bar pressure, you can continuously use the pump more than 2 hours.
- Specifications: General Output nut: M10*1 (not G1/8) , 8mm wide use quick connector, Max pressure : 310 bar or 4500 psi, Light weight 3.1 kg, Portable size: length 62cm/24.5inch closed, 105cm/41.3inch open
- What You Get: GX PCP Hand Pump, user manual, accessory kit and 18 months worry free warranty.( replacment or refund if deffective, email us anytime).
From the manufacturer
Weight: 6.84 lbs
Height: 62cm/24.5inch closed
1，3.5 Stage high pressure pump
2, Max pressure 4500 psi/310Bar
3, stainless steel body, rubber grip for long life
4，Oil-water filter can remove 90% of moisture
1, pls don't disassemble any joint when there aregas residual in the pump.
2,don't put your hand near the air vent or point people when you open the bleed value screw
3,pls tighten all connections before using and check the leaking
4.It will has the hiss and water sounds when you release the gas.
|Cooling system||Built-in fan||Built-in fan|
|Power:||12v DC or 110V AC||12v DC or 110V AC||Hand|
|Shut down:||Manually||Autostop(set pressure)|
Hooked this to my Benjamin bullpup and pumped about 20 pumps. But the indicator arrow did not move one iota.
This is the best high pressure pump on Amazon hands down. Ideal for pcp or scuba needs. This pump is solid. The build quality is far superior to all the other pumps I’ve owned that were made in China. You can tell just by how well it’s packaged its quality.
Buy this pump. It’s worth the money.
You will not regret it.
pumpin tire to Bengy well.
Worked great but hard for me to pump past 3300psi. Bought another one costing twice as much thinking it would be easier. Not so. Sent it back and ordered this one again. My cheap compressor is now working so I will only use the hand pump when the compressor isn’t around or it beaks again. I do like the filter on the hose. I have an Avenger pcp which pumps to 4300psi and an FX pcp which pumps to 3300psi. I can fill the FX with a lot of effort but not the Avenger. Still better than nothing when the compressor is not available.
Works very well . I had bought a cheap one did not last and took forever to pump up my PCP . It seemed it only took half the time to do the job