GX PUMP M6 3 Stage Pcp Air Rifle Filling Stirrup Pump 4500psi Charging Hose Gas Filter
More labor-saving 3-stage PCP Hand Pump: Comparing with the other model GX-H4 , this pump adopts new design. You can save much energy in every stroke. It also means the same...
- More labor-saving 3-stage PCP Hand Pump: Comparing with the other model GX-H4 , this pump adopts new design. You can save much energy in every stroke. It also means the same air tank should need more fills than H4 model. Test inflating fills: 500cc tank from 1000psi to 3000psi needs 420 fills; 200cc tank from 1000psi to 3000psi needs 180 fills.
- Durable Quality and Durable Performance: With the high quality stainless steel pump body and rubber handle, wide and strong base plate, it can ensure more stable and long-lasting using life. It can bear over 15000 times of tear and wear. At the 200 bar pressure, you can continuously use the pump more than 2 hours.
- External Oil-Moisture Filter : With the new filter design, it can filter above 90% of moisture. When the blue desiccant become red after absorbing enough water, you can pour them out for dring by referring to the user manual. Note: This filter can only use for pcp filling .we suggest you buy a new breathing filter if you inflate scuba diving tank.
- Specifications: General Output nut: M10*1 (not G1/8) , 8mm wide use quick connector, Max pressure : 310 bar or 4500 psi, Light weight 2.7 kg, Portable size: length 62cm/24.5inch closed, 105cm/41.3inch open
- What You Get: GX PCP Hand Pump, user manual, accessory kit and 18 months worry free warranty.( replacment or refund if deffective, email us anytime).
Product Description
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|
| GX M6 pcp hand pump | GX H4 pcp hand pump | GX CS2 pcp compressor | GX CS3 pcp compressor | GX 5K2 2 Pistons pcp compressor | |
| Stop | Manually | auto-stop | auto-stop | ||
| filling tank | less 1L | less 1.5L | 20L | ||
| max pressure | 4500psi/300bar | 4500psi/300bar | 4500psi/300bar | 4500psi/300bar | 4500psi/300bar |
| pistons | 1 | 1 | 1 | 1 | 2 |
| weight | 2.7kg | 3.1kg | 6.7kg | 7.5kg | 48kg |
| cooling | fans | fans | inner water tank+ fans | ||
| lubrications | oil | grease | food-grade grease( added well before factory and no need to add in future) | food-grade grease( added well before factory and no need to add in future) | grease (need to add when runs out as the timer shows) |
| filter | External only | external+built-in | external (need to intall) | built-in | built-in |
| compression stage | 3 | 3.5 |
Click the button to copy the discount code to get another 10% off
Customer Reviews
it works as a good pump that gets my air saber elite 2 to 4kpsi . it also serves as a mini gym and gives you a work out getting there! i would buy again and have recomended to friends
Took less time to get my PCP air rifle up to 2700 psi then was expected! Only had it a short time, but so far very happy with it.
Took less time to get my PCP air rifle up to 2700 psi then was expected! Only had it a short time, but so far very happy with it.
I purchased this pump so I would have a way to recharge my PCP airgun on the road. It came completely assembled and worked correctly out of the box. It came with extra o- rings, oil and a manual.
I’m a few thousand feet above sea level and for my airgun it takes about 100 full pumps of the handle per 1000psi of charge.
This pump is definitely capable of 4500psi. But those last 800 or so PSI require a LOT of weight on the pump. So smaller lighter folks may have a harder time pumping it past 3500psi or so.
Like all of these pumps, you’ll need to stop and feel the bottom of the tube every couple minutes. If the pump is getting hot, take a break until it cools off. Overheating these hand pumps is the easiest way to blow out the seals.
Bottom line, this is a great pump. Everything on it works great. It is well-built and has much smoother action than the cheap $50 pumps I’ve used in the past. All in all, I highly recommend this hand pump.
I recently purchased this GX hand pump. I have been wanting one for awhile now. I've looked at several models, and really liked the visible incandescent beads. The last thing I want is moisture getting into my guns. And, being able to see it without taking everything apart, was a plus for me.
I have a couple compressors and plan on getting some tanks. However, I still wanted a hand pump for backup. This is the first hand pump that I have used. Everyone always says what a pain hand pumping is, and from what others have said, I would have to disagree when it comes to this pump. I filled my Gauntlet from 2000-3000 psi in about 3 minutes.
Yes, it is manual labor. But, not nearly as difficult as I expected. All in all, I am very impressed with this pump. And, happy to have it in my collection. If you're looking for a hand pump, I would definitely recommend this one!
